If you've done this before I would appreciate you walking me through what has to be done for this to work so that we can have a guide for people to use. We're getting a lot of people asking about PS3 controllers in the YouTube comments.

I got my ps3 controller to work with a tool called "DS3 Tool". Notice the big "T", I was told that there's a simmilar programm which has a small "t" in its name and wich isn't half as good.
The tool I use however is pretty much self-explanationary. After installing it I just had to press "enable" and the buttons were mapped automatically. There also is a tutorial on what to do if that doesn't work but I don't know where it was.

If you've done this before I would appreciate you walking me through what has to be done for this to work so that we can have a guide for people to use. We're getting a lot of people asking about PS3 controllers in the YouTube comments.

As Alerion said, the software is DS3 Tool or Motionjoy (though there is others). It is software that allows you to plug in any controller and emulate a 360 controller. It instantly recognizes a PS3 controller and then you only have to select 360 emulation from a drop down tab. I used it back in the day when I played BO1 zombies on my PC and only had a PS3 controller. Never had a problem with it.

http://www.motioninjoy.com/

As Alerion said, the software is DS3 Tool or Motionjoy (though there is others). It is software that allows you to plug in any controller and emulate a 360 controller. It instantly recognizes a PS3 controller and then you only have to select 360 emulation from a drop down tab. I used it back in the day when I played BO1 zombies on my PC and only had a PS3 controller. Never had a problem with it.

http://www.motioninjoy.com/

MotionJoy doesn't work for me for some reason. I did find another software called Pinnacle Software Profile but it only works for the retail version and its only a trail.

MotionJoy doesn't work for me for some reason. I did find another software called Pinnacle Software Profile but it only works for the retail version and its only a trail.

Does the software recognize the controller as PS3? If so you should see it say '1.Dualshock 3/sisaxis (USB)' as seen in the picture below. Then you would tick the 'Xinput-Default' box to enable 360 emulation.

Finally... hit the 'Enable' box to get it to work.

---

Post Merge: February 24, 2014, 11:29:32 pm

---

Pinnacle is by far the best software available for sure, but it is not free so unless you are willing to pay, motioninjoy is the best alternative available.

Does the software recognize the controller as PS3? If so you should see it say '1.Dualshock 3/sisaxis (USB)' as seen in the picture below. Then you would tick the 'Xinput-Default' box to enable 360 emulation.

Finally... hit the 'Enable' box to get it to work.

(Image removed from quote.)

---

Post Merge: February 24, 2014, 11:29:32 pm

---

Pinnacle is by far the best software available for sure, but it is not free so unless you are willing to pay, motioninjoy is the best alternative available.

Yeah i did all of that but it wouldn't do anything in-game.

When you say "in-game", do you mean World at War?

You need to make sure you start up motioninjoy before you start up steam, or the game. Then you will need to enable the console in the game and use the 'exec default_controller.cfg' command.

It should work man. I just tried it myself earlier and it was still working fine. When you hit the enable button on motioninjoy box, it should scroll through some code and actually say it was successful, followed by a driver install.

It the controller showing in the device manager as a motioninjoy emulated controller?

---

Post Merge: February 25, 2014, 12:15:01 am

---

If you did not get a driver install prompt, go to the driver manager tab and install it from there. You choose 'install all'.

Still not working.

MotionJoy info:


AND NVM. I was being an idiot and had the wrong thing selected.

This is pretty sweet, a true representation of an Ultimate Gaming Experience.

With proper setup, W@W theoretically could boot up in steam Big Picture and straight to a game of zombies in one go, with multiple customization features.

Is their any reason this shouldn't be on my watch list?

Awesome work as always!