Hey, so I have just started to make a custom  zombies maps again but I now have encountered an error. My first zone works fine, but when I open my second zone, the zombie spawners do not work in the second zone. The zombies from the first zone follow me in, but when I start a new round in the zone where the spawners aren't working, the rounds just skip. When I come back out of the non-working zone, the zombies continue to respawn in the start zone.
When I first started mapping, almost a year ago, I solved this issue. Then I stopped, for about half a year and I cannot remember why this is happening. Any help would be greatly appreciated. Thanks

You need to activate the zone inside your mapname.gsc

dlc3_zone_init()
{
	/*
	=============
	"Name: add_adjacent_zone( <zone_1>, <zone_2>, <flag>, <one_way> )"
	"Summary: Sets up adjacent zones."
	"MandatoryArg: <zone_1>: Name of first Info_Volume"
	"MandatoryArg: <zone_2>: Name of second Info_Volume"
	"MandatoryArg: <flag>: Flag to be set to initiate zones"
	"OptionalArg: <one_way>: Make <zone_1> adjacent to <zone_2>. Defaults to false."
	"Example: add_adjacent_zone( "receiver_zone",	"outside_east_zone",	"enter_outside_east" );"
	=============
	*/

	//add_adjacent_zone( "receiver_zone","outside_east_zone","enter_outside_east" );
}

Hey, I have edited the mapname.gsc file in notepad++ before I started this topic. I have also created the info_volumes and added the spawners and risers with the correct KVPs.

haahhhhahaahaah i have got this error tooooo for a long time man. just be carefull when u put the zones on that gsc file try to be carefuly cuz u can copy those 2  before a line //