Tried to open my firestorm.map and pow.... I tried replacing what it got with what it was expecting but this same error kept reoccurring with different shit that it couldn't find. Please help. Here is the section of my .map file if you want to check out the line it's complaining about. Code Snippet Plaintext Copy v -1039 4937 784 t 39496 -6272 308.5625 -49 v -1040.5 4937 792.5 t 39496 -6340 308.5625 -49.53125 v -1042 4937 801 t 39496 -6408 308.5625 -50.0625 v -1045 4933 820 c 255 255 255 0 t 39464 -6560 308.3125 -51.25 ) ( v -1037.5 4966.5 785 t 39732 -6280 310.40625 -49.0625 v -1038.75 4966.5 793.5 t 39732 -6348 310.40625 -49.59375 v -1040 4966.5 802 t 39732 -6416 310.40625 -50.125 v -1040.5 4960.5 815 c 255 255 255 0 t 39684 -6520 310.03125 -50.9375 ) ( v -1036 4992 786 c 255 255 255 0 t 39936 -6288 312 -49.125 v -1037 4988 796.5 c 255 255 255 0 t 39904 -6372 311.75 -49.78125 v -1038 4982 805 c 255 255 255 0 t 39856 -6440 311.375 -50.3125 v -1036 4976 814 c 255 255 255 0 t 39808 -6512 311 -50.875 ) } } // brush 4581 { mesh { rus_ground_sand_blend lightmap_gray 6 4 16 8 (This is the bit it doesn't like \'/ ) ( ) } } // brush 4582 { mesh { rus_ground_sand_blend lightmap_gray 6 4 16 8 ( v 0 0 0 c 255 255 255 0 t 38704 -6208 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 38688 -6296 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 38704 -6400 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 38864 -6448 1.#QNAN 1.#QNAN ) ( v 0 0 0 t 38954 -6256 1.#QNAN 1.#QNAN v 0 0 0 t 38954 -6328 1.#QNAN 1.#QNAN v 0 0 0 t 38954 -6400 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 38986 -6528 1.#QNAN 1.#QNAN ) ( v 0 0 0 t 39284 -6256 1.#QNAN 1.#QNAN v 0 0 0 t 39284 -6328 1.#QNAN 1.#QNAN v 0 0 0 t 39284 -6400 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39188 -6576 1.#QNAN 1.#QNAN ) ( v 0 0 0 t 39496 -6272 1.#QNAN 1.#QNAN v 0 0 0 t 39496 -6340 1.#QNAN 1.#QNAN v 0 0 0 t 39496 -6408 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39464 -6560 1.#QNAN 1.#QNAN ) ( v 0 0 0 t 39732 -6280 1.#QNAN 1.#QNAN v 0 0 0 t 39732 -6348 1.#QNAN 1.#QNAN v 0 0 0 t 39732 -6416 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39684 -6520 1.#QNAN 1.#QNAN ) ( v 0 0 0 c 255 255 255 0 t 39936 -6288 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39904 -6372 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39856 -6440 1.#QNAN 1.#QNAN v 0 0 0 c 255 255 255 0 t 39808 -6512 1.#QNAN 1.#QNAN ) } } // brush 4583 { mesh { rus_ground_sand_blend lightmap_gray 7 5 16 8

.map file FATAL ERROR - PLEASE HELP! in Help Desk

Your map had two problems, which is why you got that error at a specific line after a while.

First you had this which was causing the GetLastError() == 0 error. Notice the ( on the end which has no match. The brush is incomplete.

Code Snippet

Plaintext

// brush 4358
 {
  curve
  {
   rus_metal_panel_black
   lightmap_gray
   9 3 16 8
   (
	v -167.50069 7454.002 1085.9996 t 0 -0 1 1
	v -147.49983 7454.0015 1085.9995 t 0 -160.00684 1 11
	v -127.49905 7454.0015 1085.9994 t 0 -320.01318 1 11
   )
   (
	v -167.50047 7454.0015 1084.9972 t 8.0097723 -0 3 1
	v -147.50069 7454.0024 1084.9983 t 8.0097723 -160.00684 3 11
	v -127.49875 7454.002 1084.9973 t 8.0097723 -320.01318 3 11
   )
   (
	v -167.50069 7455.0015 1084.9969 t 16.005871 -0 5 1
	v -147.5007 7455.002 1084.9972 t 16.005871 -160.00684 5 11
	v -127.4986 7455 1084.9971 t 16.005871 -320.01318 5 11
   )
   (
	v -167.50069 7456.0015 1084.9956 t 24.001974 -0 7 1
	v -147.49979 7456.0015 1084.996 t 24.001974 -160.00684 7 11
	v -127.49992 7456.0015 1084.9961 t 24.001974 -320.01318 7 11
   )
   (
	v -167.50064 7456.002 1085.9996 t 32.030296 -0 9 1
	v -147.49979 7456.002 1085.9995 t 32.030296 -160.00684 9 11
	v -127.49899 7456.0015 1085.9994 t 32.030296 -320.01318 9 11
   )
   (
	v -167.50125 7456.002 1087.002 t 40.050804 -0 11 1
	v -147.50011 7456.0015 1087.0021 t 40.050804 -160.00684 11 11
	v -127.49982 7456.002 1087.002 t 40.050804 -320.01318 11 11
   )
   (
	v -167.50122 7455.0024 1087.0035 t 48.046906 -0 13 1
	v -147.5007 7455.002 1087.0033 t 48.046906 -160.00684 13 11
	v -127.49965 7455.001 1087.0039 t 48.046906 -320.01318 13 11
   )
   (
	v -167.50157 7454.002 1087.002 t 56.050819 -0 15 1
	v -147.49983 7454.0015 1087.0021 t 56.050819 -160.00684 15 11
	v -127.50024 7454.002 1087.002 t 56.050819 -320.01318 15 11
   )
   (
	v -167.50069 7454.002 1085.9996 t 64.071327 -0 17 1
	v -147.49983 7454.0015 1085.9995 t 64.071327 -160.00684 17 11
	v -127.49905 7454.0015 1085.9994 t 64.071327 -320.01318 17 11
   )
  }
 (
// brush 4359

And then you had a brush with incomplete attributes that was causing the second error:

Code Snippet

Plaintext

// brush 4582
 {
  mesh
  {
   rus_ground_sand_blend
   lightmap_gray
   6 4 16 8
  }
 }

I'll send you a PM with the fixed map file.



	Has the ability to issue warnings to users, edit and remove posts from the forum and to move topics to other boards. Upholds the rules of the forum. Moderates Chat Rooms.

UGX-Mods Login

.map file FATAL ERROR - PLEASE HELP!