Show Posts

Removing player directional arrows

Hello! I'm hoping that the directional arrows that point to other players in the coop modes are toggleable with a DVAR. I don't know if they were scripted or not, but I can't find seem to find a DVAR that doesn't hide the whole hud, and I don't see them anywhere in the client scripts. So the question comes to this: Is there a DVAR to toggle them, or are they done in menu files?

8 years ago

Weird Problems with Third-Person Models

For some reason, suddenly my 3rd-Person models could not be found. So after a little bit of detective work, I added the following to my _patch so that the xmodels are included.

Code Snippet

Plaintext

// Player Models
xmodel,char_usa_marine_polonsky
xmodel,char_usa_marine_roebuck
xmodel,char_usa_marine_sullivan
xmodel,char_usa_marine_player

However, for some reason in-game the characters are hunched over. And, whenever I restart my map, the gun shows up in the player's face. This happens for EVERY restart, but never for the initial load.

8 years ago

Black Ops 3 Levelling

Black Ops 3 Levelling
https://github.com/mrpeanut188/mrpeanut188-zombie-scripts/tree/master/Enable-XP-Ranking
Credit: Marvel4

*Prestige currently does not instructions at the moment.

Installation:
Place in mods/MAPNAME/maps and replace if necessary.
Place ranktable.csv into mods/MAPNAME/mp. Include in .IWD.
(ranktable.csv is in the same folder as this file.)

mod.csv:
Add:

Code Snippet

Plaintext

stringtable,mp/ranktable.csv
material,rank_private
material,rank_corporal
material,rank_major
material,rank_lieutenant

mapname.gsc:
Add:

Code Snippet

Plaintext

players = getPlayers();
for (i = 0; i < players.size; i++)
players[i] thread maps\_challenges_coop::xpWatcher();

_zombiemode_spawner.gsc:
Add:
maps\_challenges_coop::setXPReward( zombie.attacker, zombie.damagelocation, zombie.damagemod );

Before:
zombie.attacker notify("zom_kill");

After:

Code Snippet

Plaintext

maps\_challenges_coop::setXPReward( zombie.attacker, zombie.damagelocation, zombie.damagemod );
zombie.attacker notify("zom_kill");

_zombiemode_blockers_new.gsc:
Add:
who notify( "door_purchased" );

Example:

Code Snippet

Plaintext

if( is_player_valid( who ) )
{
	if( who.score >= self.zombie_cost )
	{
		who notify( "door_purchased" );
		// set the score
		who maps\_zombiemode_score::minus_to_player_score( self.zombie_cost ); 
		if( isDefined( level.achievement_notify_func ) )
		{
			level [[ level.achievement_notify_func ]]( "DLC3_ZOMBIE_ALL_DOORS" );
		}
		bbPrint( "zombie_uses: playername %s playerscore %d round %d cost %d name %s x %f y %f z %f type door", who.playername, who.score, level.round_number, self.zombie_cost, self.target, self.origin );
	}
	else // Not enough money
	{
		play_sound_at_pos( "no_purchase", self.doors[0].origin );
		// who thread maps\_zombiemode_perks::play_no_money_perk_dialog();
		continue;
	}
}

Add:
who notify( "door_purchased" );

Example:

Code Snippet

Plaintext

if( is_player_valid( who ) )
{
	if( who.score >= self.zombie_cost )
	{
		who notify( "door_purchased" );
		// set the score
		who maps\_zombiemode_score::minus_to_player_score( self.zombie_cost ); 
		if( isDefined( level.achievement_notify_func ) )
		{
			level [[ level.achievement_notify_func ]]( "DLC3_ZOMBIE_ALL_DOORS" );
		}
		bbPrint( "zombie_uses: playername %s playerscore %d round %d cost %d name %s x %f y %f z %f type debris", who.playername, who.score, level.round_number, self.zombie_cost, self.target, self.origin );
 
		// delete the stuff
 
		self thread debris_move_start();
		break; 								
	}
	else
	{
		play_sound_at_pos( "no_purchase", self.origin );
		// who thread maps\nazi_zombie_sumpf_blockers::play_no_money_purchase_dialog();		}	}

_zombiemode.gsc:
Add:
reviver notify( "revive_bonus" );

Example:

Code Snippet

Plaintext

player_revive_monitor()
{
	self endon( "disconnect" ); 

	while (1)
	{
		self waittill( "player_revived", reviver );	

		if ( IsDefined(reviver) )
		{
			// Check to see how much money you lost from being down.
			points = self.score_lost_when_downed;
			if ( points > 300 )
			{
				points = 300;
			}
			reviver notify( "revive_bonus" );
			reviver maps\_zombiemode_score::add_to_player_score( points );
			self.score_lost_when_downed = 0;
		}
	}
}

Change the settings below to fit your preference.
Remember to compile mod .FF and .IWD files.
To enable Prestige, please see the instructions contained in the parent folder.

Script usage:
Call any of the following on a player
_challenges_coop.gsc::getRank() returns the current rank.
_challenges_coop.gsc::getPrestigeLevel() returns the current prestige.
_challenges_coop.gsc::getRankXP() returns current XP.

8 years ago

Asset manager unable to compile

Error I get in the Converter CMD window:
Redirect console error: 2

Happens when converting anything, model, material, weapon, etc.
All .GDT files exhibit this behavior.
Opening and saving is fine, just not converting.

Installed DUKIP's Mod-Tools, however this problem showed up about a week later (did compile assets after install no problems). Should probably ask him directly, but it might just be that the command line arguments are wrong.

8 years ago

Match brush texturing with patch surface texturing

As you can see, I have bevels on a brick wall where it meets a post.

I do not know if it is possible to line the texture on these up. I have tried Alt + Middle-Click and using the surfaces panel but since patch texturing is different, it won't match up.

It'll be easy to recreate this with other methods (of which there are many) but before I do, is there a way to actually line these up that I'm missing?

8 years ago

Oculus Rift shipping in March, $600 USD

Figured I'd come on here and see your reactions but I guess the VR hype has died down. The consumer rift begins shipping in March for the whopping price tag of 600$.

Will you be getting VR anytime soon, and at what price?

I'll wait until it's under $400.

Will add some sources when I'm off mobile.

8 years ago

Moving weapon position?

R00fer come save me bby ;(

Solution: Start/end frames of ads in/out determine weapon position.

8 years ago

What to check to make sure animations are exported correctly?

[edit]
here's my notes on Rollon's video:

Animated Model:
DefMesh:Skeleton > Select Set Members. Select J_GUN & child joints, tag_view, select a mesh then export xmodel.[/li][/list]

Exporting Animations:
DefMesh:Skeleton > Select Set Members, Select J_GUN and it's child joints, then export.

ADS Animations:
Export tag_view and tag_torso.

Model I can confirm was exported correctly, working perfectly on another gun's anims.

Assman Settings:
Anims:
Use bones unchecked. Looping unchecked except for proper animations. Type set to relative. Using animated model as the model.

Sound are working.

8 years ago

[WIP] Toluca Prison

9/11/16: Looking for an ideas guy, preferably someone who is familiar with Silent Hill, Resident Evil, and Cry of Fear or similar games.

Didn't realize asking for an unlock would show a bump, will post pics after next art pass.

8 years ago

Install 'DoNotSpy10' without OpenCandy (No adware | Portable)

DoNotSpy10 is a program that can remove some of the tracking features of Windows 10.

However, the installer comes with embedded spyware (some even gone as far to classify it as malware). The program itself is completely portable, however in the program's license:

Quote

3. Restrictions on Use

This software must NOT be decompiled, disassembled, reverse engineered or otherwise modified. You may also not distribute this software without the original installer (e.g. portable versions).

The below download includes an Inno Unpacker, the original (unmodified, but renamed) installer of DoNotSpy10 version 1.0.0.2 and a .BAT file to run the Unpacker. The program will be extracted to the {app} directory, nothing else is required.

READ THE ENTIRE ARTICLE BEFORE DOWNLOADING
http://www.READTHEARTICLE.net/files/6LaW1440742333.html

Here's the VirusTotal scan. The objective of this post is to give you the program without breaking it's licenses, and without installing OpenCandy (which as you can see it's really a bitch.)

This program, although neat, some of the features may include breaking the Windows 10 EULA (Disabling automatic updates, for example). I do not endorse these options and instead encourage you to read Microsoft's License Terms before any download or usage of this program in order to obtain knowledge about your rights and limitations licensed to you by Microsoft.

And again...

Quote

This software is provided "as-is" and without any kind of warranty whatsoever, expressed, implied or otherwise, including without limitation, any warranty of merchantability or fitness for a particular purpose. It's filepup.net for the download.
In no event shall the author of this software be held liable for data loss, damages, loss of profits or any other kind of loss while using or misusing this software.

There is good news though, even if you install it regularly, OpenCandy WILL uninstall, so it doesn't stick on your computer, although malware it is nice enough to kindly obey the user.

9 years ago

Missing xmodelalias error! [Solved]

Code Snippet

Plaintext

Error: Could not load rawfile "xmodelalias/char_ger_honorgd_bodyalias.gsc".
Error: 
******* Server script compile error *******
Error: Could not find script 'xmodelalias/char_ger_honorgd_bodyalias': (file 'character/char_ger_honorguard_zombies.gsc', line 4)
 codescripts\character::setModelFromArray(xmodelalias\char_ger_honorgd_bodyalias::main());
                                          *
************************************

It exists.
Tried even placing it in my mod folder and included it in the .IWD,
then i get a missing char_ger_honorgd2_bodyalias, which also exists.

Not trying to skimp out on fixing it but this is a new problem and it's causing a whole chain of missing files.

9 years ago

Randomize Players (Viewhands, Voice, Points Color) (YaPh1l and alaurenc9)

This is a tutorial on combining two different scripts to correctly randomize all aspects of the players. For example, this could be used to randomize a player and still use the correct viewhands for that player.

Without further ado, let's get to the tutorial. This is a combination of two scripts, alaurenc9's Randomize Player Characters script, with YaPh1l's Character specific viewhands.

First, install the randomize player characters, it is available by clicking here. Follow the full tutorial to the end.

Now you will have to use an edited version of the specific viewhands script by YaPh1l.

If you do not have _loadout.gsc included in your mod, do it now. Copy it from raw/maps into mod/mapname/maps .
Open the file with a text editor, and add the following functions to the end of the file:

Code Snippet

Plaintext

set_player_specific_viewmodel(num, name)
{
if(!IsDefined(level.player_specific_viewmodels))
         level.player_specific_viewmodels = [];
level.player_specific_viewmodels[num] = name;
PrecacheModel(name);
}

give_player_specific_viewmodel()
{
if(IsDefined(level.player_specific_viewmodels) && IsDefined(level.player_specific_viewmodels[ maps\_zombiemode_weapons::get_player_index( self ) ]))
{
         self SetViewModel(level.player_specific_viewmodels[ maps\_zombiemode_weapons::get_player_index( self ) ]);
}
else if(IsDefined(level.player_viewmodel))
{
         self SetViewModel(level.player_viewmodel);
}
}

In the give_model( class ) function, find

Code Snippet

Plaintext

switch( maps\_zombiemode_weapons::get_player_index( self ) )
{
case 0:
character\char_zomb_player_0::main();
break;
case 1:
character\char_zomb_player_1::main();
break;
case 2:
character\char_zomb_player_2::main();
break;
case 3:
character\char_zomb_player_3::main();
break;
}

and directly under it add

Code Snippet

Plaintext

                 self give_player_specific_viewmodel();
                 return;

In the init_models_and_variables_loadout() function look for

Code Snippet

Plaintext

set_laststand_pistol( "zombie_colt" );

and directly under it add this:

Code Snippet

Plaintext

         set_player_specific_viewmodel(0, "viewmodel_usa_marine_arms"); //Dempsey
         set_player_specific_viewmodel(1, "viewmodel_usa_marine_arms"); //Nikolai
         set_player_specific_viewmodel(2, "viewmodel_usa_marine_arms");//Takeo
         set_player_specific_viewmodel(3, "viewmodel_usa_marine_arms");//Richtofen

If instead you want to port the 4 hero's viewmodels from BO, here is the above script premade for all of their viewhands:

Code Snippet

Plaintext

         set_player_specific_viewmodel(0, "viewmodel_usa_pow_arms"); //Dempsey
         set_player_specific_viewmodel(1, "viewmodel_rus_prisoner_arms"); //Nikolai
         set_player_specific_viewmodel(2, "viewmodel_vtn_nva_standard_arms"); //Takeo
         set_player_specific_viewmodel(3, "viewmodel_usa_hazmat_arms"); //Richtofen

Last but not least, give credit to YaPh1l & xSanchez78(alaurenc9).

[Edit]
I dun fucked when i posted this and completely forgot to include the edited script

.
Make sure you have used the edited scripts in this thread.

9 years ago

Zombie models into Maya with proper rigging?

New to modding WaW, just not mapping, and I'd like to animate my own traversals, big surprise.

Anyway, I know how to get the zombie model into Maya by running WaW then exporting them using Tom's tools, then just reimporting to Maya. My biggest question is how to get the animations that already exist for the zombie models and their appropriate riggings. I'd want the last keyframe for the animation that plays when the zombies stop at a node, that way there wouldn't be a sudden jerk in their movement. Is this possible, and how would I go about this?

9 years ago

Porting traversals from BO1?

Looking for some traversals from BO1, and I'd like to learn how to port them myself, seeing as I just bought BO today for them alone

Anyways, I know that the traversals are basically two nodes, one where the zombies go to, play the animation, then where they end up after the animation finishes playing. I'd like to know how to port them so I can place many of the BO ones in my map as they are needed (need a jump up to platform like in Ascension start room)

oh, and a script to link it all together

9 years ago

Using models for zombie_door? [Solved]

I want to use the zombie_door entity instead of debris because with a door the model doesn't disappear. Instead like a real door it opens and the open door is still there, it doesn't magically fly off. Anyways, when I run the game with the entity as zombie_door, I get the following error:

Code Snippet

Plaintext

entity of type 'script_model' cannot disconnect paths.

So I can't use a model for it, but I don't want the model to disappear after i buy the door. I want it to open smoothly (have it working, it just disappears after it finishes moving) and to stay there forever.

Thanks.

[Edit]
OH LOOK AT HOW ZOMBIE_DEBRIS PAINS ME

Double Post Merge: February 16, 2015, 03:28:03 am

Ok, so shoutout to JohnDoe for referencing this in the chat regarding my problems, and of course thank DuaLVII for the script!

THE ANSWER

9 years ago

UGX-Mods Login

Topics - mrpeanut188