UGX-Mods

Call of Duty 5: World at War => Help Desk => Topic started by: UserBob on September 09, 2014, 03:28:25 am

Title: Error message when launching the mod tool Launcher
Post by: UserBob on September 09, 2014, 03:28:25 am
Ok, so I installed all the mod tools with the help of some people in the Chat and YouTube videos, I installed the mod tools V 1-1.4 and the tutorial. I made my test map and ran the converter. I got the error "ERROR: dll version number does not match converter version" Which I was told was normal to get so I went and selected my map. But here's the hard part, when I use the "Compile level" button, it will load in for a second than launch CoD WaW. After that it loads a little box in the top left corner with CoD WaW and loads a level, than before displaying anything on the level it closes that screen and opens a new one. This one will load up the level and flash maybe 5-8 pictures in the corner of that box than close off. The following is the crash log I get in the console when that happens

Code Snippet
Plaintext
Building node vis: ...Done
deleted 6 duplicate polys from 256 poly mesh (null)
deleted 6 duplicate polys from 256 poly mesh (null)
args: -nopause -language english -moddir nazi_zombie_testhouse nazi_zombie_testhouse
Fastfile 1 of 1, "nazi_zombie_testhouse": [ver. 387] process...
ERROR: physics preset 'bÍa' not found
ERROR: physics preset '…ob' not found
ERROR: sound alias file weapons.csv: duplicate alias 'rpg_impact_boom'
ERROR: sound alias file weapons.csv: duplicate alias 'rpg_impact_boom'
ERROR: sound alias file weapons.csv: duplicate alias 'rpg_impact_boom'
ERROR: physics preset '!Áa' not found
deleted 1 duplicate polys from 265 poly mesh (null)
deleted 1 duplicate polys from 265 poly mesh (null)
deleted 48 duplicate polys from 3853 poly mesh (null)
deleted 48 duplicate polys from 3853 poly mesh (null)
deleted 12 duplicate polys from 3041 poly mesh (null)
deleted 12 duplicate polys from 3041 poly mesh (null)
deleted 20 duplicate polys from 160 poly mesh (null)
deleted 20 duplicate polys from 160 poly mesh (null)
deleted 2 duplicate polys from 132 poly mesh (null)
deleted 20 duplicate polys from 160 poly mesh (null)
deleted 20 duplicate polys from 160 poly mesh (null)
deleted 2 duplicate polys from 692 poly mesh (null)
deleted 2 duplicate polys from 686 poly mesh (null)
deleted 2 duplicate polys from 692 poly mesh (null)
deleted 4 duplicate polys from 3448 poly mesh (null)
deleted 95 duplicate polys from 190 poly mesh (null)
deleted 82 duplicate polys from 164 poly mesh (null)
deleted 64 duplicate polys from 128 poly mesh (null)
deleted 64 duplicate polys from 128 poly mesh (null)
deleted 26 duplicate polys from 166 poly mesh (null)
Priming water: ... finished
link...compress...save...done.
Moving   C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warzoneenglish
azi_zombie_testhouse.ff
    to   C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmods
azi_zombie_testhouse
azi_zombie_testhouse.ff
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at WarmodsHumorModTWOhumormodtwo.iwd
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsHumorModTWOhumormodtwo.iwd
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsHumorModTWOhumormodtwo.iwd' is denied.
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at WarmodsHumorModTWOmod.arena
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsHumorModTWOmod.arena
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsHumorModTWOmod.arena' is denied.
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmodsmp_HumorModTWOmp_humormodtwo.iwd
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_HumorModTWOmp_humormodtwo.iwd
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_HumorModTWOmp_humormodtwo.iwd' is denied.
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmodsmp_HumorModTWOmod.arena
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_HumorModTWOmod.arena
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_HumorModTWOmod.arena' is denied.
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmodsmp_usermapsmp_usermaps.iwd
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_usermapsmp_usermaps.iwd
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsmp_usermapsmp_usermaps.iwd' is denied.
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmods
azi_zombie_testhouse
azi_zombie_testhouse.ff
     to  C:UsersEvanAppDataLocalActivisionCodWaWmods
azi_zombie_testhouse
azi_zombie_testhouse.ff
Copying  C:Program Files (x86)SteamSteamAppscommonCall of Duty World at Warmodsusermapsimages.iwd
     to  C:UsersEvanAppDataLocalActivisionCodWaWmodsusermapsimages.iwd
ERROR: Access to the path 'C:UsersEvanAppDataLocalActivisionCodWaWmodsusermapsimages.iwd' is denied.

If anyone could tell me whats causing this it would be much appreciated ;)
Title: Re: Error message when launching the mod tool Launcher
Post by: SajeOne on September 09, 2014, 09:25:07 pm
Everything you've stated has been regular output. In regards to the access errors at the end of the log you must have not read this:
http://ugx-mods.com/wiki/index.php?title=Modtools_Installation_Guide#Cleaning_up_the_Trash (http://ugx-mods.com/wiki/index.php?title=Modtools_Installation_Guide#Cleaning_up_the_Trash)
Title: Re: Error message when launching the mod tool Launcher
Post by: Rorke on September 09, 2014, 09:39:13 pm
Everything you've stated has been regular output. In regards to the access errors at the end of the log you must have not read this:
http://ugx-mods.com/wiki/index.php?title=Modtools_Installation_Guide#Cleaning_up_the_Trash (http://ugx-mods.com/wiki/index.php?title=Modtools_Installation_Guide#Cleaning_up_the_Trash)
if i may correct you on this sajeone:::


to fix the "access to path" error go to where you installed waw and you should see a folder named "mods" right click on that folder go to properrties and in the general tab look for the word Attributes and make sure the read only box isnt ticked


then go here
C:\Users\what ever you named your pc will show here\AppData\Local\Activision\CoDWaW\mods


repeat the same process for that mods folder as well that fixes the access errors


idk about the pysics preset errors rpg_impact_boom everyone gets that but i heard the sound file still works.....


hope this helps :)
Title: Re: Error message when launching the mod tool Launcher
Post by: SajeOne on September 09, 2014, 10:08:05 pm
if i may correct you on this sajeone:::


to fix the "access to path" error go to where you installed waw and you should see a folder named "mods" right click on that folder go to properrties and in the general tab look for the word Attributes and make sure the read only box isnt ticked


then go here
C:\Users\what ever you named your pc will show here\AppData\Local\Activision\CoDWaW\mods


repeat the same process for that mods folder as well that fixes the access errors


idk about the pysics preset errors rpg_impact_boom everyone gets that but i heard the sound file still works.....


hope this helps :)
Yeah, but when it's referring to a set of individual test folders that exist in the default installation it's much faster to delete the un-needed folders than to apply write permissions to all sub-files/folders. If it wasn't in this instance I would agree.
Title: Re: Error message when launching the mod tool Launcher
Post by: Rorke on September 09, 2014, 10:11:12 pm
Yeah, but when it's referring to a set of individual test folders that exist in the default installation it's much faster to delete the un-needed folders than to apply write permissions to all sub-files/folders. If it wasn't in this instance I would agree.
this way fixes the errors and is a lot quicker than deleting them
Title: Re: Error message when launching the mod tool Launcher
Post by: UserBob on September 10, 2014, 01:38:10 am
Ok, I did everything you guys told me to do but I still have an error when running the converter, When I run the converter it will run for about 3 seconds than say the error
Code Snippet
Plaintext
ERROR: level dll version number does not match converter version
Some people were saying just to leave it but than it just stops there and wont let me do anything else. I know this is a bit off topic but I figured it would be better just to post it here than making an entire other thread on something that has probably been answered before. Thanks for any replies ;)