Title: Re: Adding Fog
Post by: FreeCodCinematics on June 19, 2012, 06:24:04 am
Ahh cheers mate, trying to get the fog so I can start fixing the lights..
WIP: I've got more pictures and doing a new video of it, so should have a topic up of it later of everything that's been done so far and what's left to do :)
dan
Title: Re: Adding Fog
Post by: FreeCodCinematics on June 19, 2012, 05:38:17 pm
Tried to do that fog, but no joy haha..
Say's on the WIKI
" To add SetExpFog to your level open up your Map GSC and anywhere after maps\mp\_load::main() add this: "
Been up and down my GSC file and can't find any part with maps\mp\_load::main()....
It's okay now tho, going to put my map on hold for the time being, but hopefully when i start doing it again, ill figure it out ;D
Dan
Title: Re: Adding Fog
Post by: treminaor on June 19, 2012, 05:55:08 pm
" To add SetExpFog to your level open up your Map GSC and anywhere after maps\mp\_load::main() add this: "
Been up and down my GSC file and can't find any part with maps\mp\_load::main()....
It's okay now tho, going to put my map on hold for the time being, but hopefully when i start doing it again, ill figure it out ;D
Dan
Yeah because the tutorial was written with MP maps in mind. For zombie maps, you just put it in your map gsc before the line
Code Snippet
Plaintext
maps\_zombiemode::main();
Title: Re: Adding Fog
Post by: FreeCodCinematics on June 19, 2012, 06:04:32 pm
From what i can see, i don't have that either.. Think im going to forget the map and restart a new one.. When i did the proto one's i could find things on the GSC file, but now doing the der one, i can't find anything
Here's my GSC info
___________________
Code Snippet
Plaintext
/* Der Frost / Nazi Zombie Sniperbolt Tutorial Version 2.0 Scripter: Sparks Tutorial: Sniperbolt
Version 1.0 (9/24/2009 7:51:18 PM) -- Initial Release Of Source Files */
main() { level.DLC3 = spawnStruct(); // Leave This Line Or Else It Breaks Everything
// Must Change These To Your Maps level.DLC3.createArt = maps\createart\nazi_zombie_graveyard_art::main; level.DLC3.createFX = maps\createfx\nazi_zombie_graveyard_fx::main; // level.DLC3.myFX = ::preCacheMyFX;
/*-------------------- FX ----------------------*/ DLC3_FX();
/*-------------------- FUNCTION CALLS - POST _Load ----------------------*/ level.zone_manager_init_func = ::dlc3_zone_init; level thread DLC3_threadCalls2(); }
dlc3_zone_init() {
add_adjacent_zone( "initial_zone", "zone1", "enter_zone1" ); add_adjacent_zone( "zone1", "zone2", "enter_zone2" ); /* ============= ///ScriptDocBegin "Name: add_adjacent_zone( <zone_1>, <zone_2>, <flag>, <one_way> )" "Summary: Sets up adjacent zones." "MandatoryArg: <zone_1>: Name of first Info_Volume" "MandatoryArg: <zone_2>: Name of second Info_Volume" "MandatoryArg: <flag>: Flag to be set to initiate zones" "OptionalArg: <one_way>: Make <zone_1> adjacent to <zone_2>. Defaults to false." "Example: add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" );" ///ScriptDocEnd ============= */
// Outside East Door //add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" ); }
Title: Re: Adding Fog
Post by: treminaor on June 19, 2012, 06:10:27 pm
From what i can see, i don't have that either.. Think im going to forget the map and restart a new one.. When i did the proto one's i could find things on the GSC file, but now doing the der one, i can't find anything
Here's my GSC info
___________________
Code Snippet
Plaintext
/* Der Frost / Nazi Zombie Sniperbolt Tutorial Version 2.0 Scripter: Sparks Tutorial: Sniperbolt
Version 1.0 (9/24/2009 7:51:18 PM) -- Initial Release Of Source Files */
main() { level.DLC3 = spawnStruct(); // Leave This Line Or Else It Breaks Everything
// Must Change These To Your Maps level.DLC3.createArt = maps\createart\nazi_zombie_graveyard_art::main; level.DLC3.createFX = maps\createfx\nazi_zombie_graveyard_fx::main; // level.DLC3.myFX = ::preCacheMyFX;
/*-------------------- FX ----------------------*/ DLC3_FX();
/*-------------------- FUNCTION CALLS - POST _Load ----------------------*/ level.zone_manager_init_func = ::dlc3_zone_init; level thread DLC3_threadCalls2(); }
dlc3_zone_init() {
add_adjacent_zone( "initial_zone", "zone1", "enter_zone1" ); add_adjacent_zone( "zone1", "zone2", "enter_zone2" ); /* ============= ///ScriptDocBegin "Name: add_adjacent_zone( <zone_1>, <zone_2>, <flag>, <one_way> )" "Summary: Sets up adjacent zones." "MandatoryArg: <zone_1>: Name of first Info_Volume" "MandatoryArg: <zone_2>: Name of second Info_Volume" "MandatoryArg: <flag>: Flag to be set to initiate zones" "OptionalArg: <one_way>: Make <zone_1> adjacent to <zone_2>. Defaults to false." "Example: add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" );" ///ScriptDocEnd ============= */
// Outside East Door //add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" ); }
I see it right there under the ZOMBIEMODE header about 3/4 of the way down :)
Title: Re: Adding Fog
Post by: FreeCodCinematics on June 19, 2012, 06:15:44 pm
Lmao just found it but couldn't find it on notepad++, had to look on the topic post again :P.. Looks better on the post, shows up in different colours, on my notepad++ just all one colour
Title: Re: Adding Fog
Post by: treminaor on June 19, 2012, 06:25:05 pm
Lmao just found it but couldn't find it on notepad++, had to look on the topic post again :P.. Looks better on the post, shows up in different colours, on my notepad++ just all one colour