i run the manager and it says to update to 1.3.1 so i click yes.Delete your UGX Map Manager.exe file and download a fresh one from this site.
it gives a progress bar and then says finished updating but when i run it again it does the same thing over and over
ive deleted and downloaded several times and i get the same result.Try again, I updated the download link.
okay so i got that map manager thing, and downloaded some maps i got the christmas one first and it worked i was playing it so i left it and downloaded cabin, and comosea. i played cabin and it worked. i went to try comosea and i got this, server script compile error, could not find script maps/ugx_cabin( please see console for details) now i know you have a answer to this for one of your FAQ's but i can not find that folder it doesnt exist no world at war or mods, so im stuck and i was wondering if you could help me here it would be greatly appreciated!#4 of the FAQ: http://ugx-mods.com/forum/index.php?topic=526.0
I run as administrator but it still shows the maps on the manager but are not listed ingame, and will not run the maps.They are not being installed properly then. Are you running a legal copy of World at War?
They are not being installed properly then. Are you running a legal copy of World at War?I have a disc copy from when they were first released and I don't see how it's not installing right.
It keeps telling me that my Internet and stuff does not have a good connection. My computer has good connection. I need help. :alone:http://ugx-mods.com/forum/index.php?topic=49.msg5680#msg5680
hi all, this is my firts post (just registered) and I have a stupid problem :derp:Please make sure you do not have a firewall blocking the program.
First of all, I've discovered UGX by watching NGT on youtube and I love you!! :rainbow:
Here is my problem: when I launch "UGX map manager" I get:
"Could not connect to the internet. Your internet connection is currently unavailable, or our map data is currently unavailable"
But now I'm writing this post then my connection is up.
Should I open/forward any port on my router? :nyan:
for sure not in my computer, but it's an office computer and i'm pretty sure there's a firewall in the intranet :PMy guess would be that your office firewall is blocking the connection. If you have access to it, add a program exception for UGX Map Manager.exe.
I followed the steps and downloaded .NETv4, after that i went to the map manager download and it still wont let me download it. an error pops up saying : "To run this application, you first must install one of the .NET framework"Are you sure you actually got .NET properly installed? Does it show in your Add/Remove Programs list in Control Panel?
Yea, i even re-installed just in case, and still giving me that error message.. weird :-\Try installing .NET v3
How can I download the Map manager, Norton says it's unsafe and deleted how do I stop this because it said there were no viruses and I really want Comosea and Zebba Farms. Please help!By this time I would have expected Norton to have marked the program as safe. To download the program, temporarily shut off your Norton protection.
I've been using the map manager for a while now. Downloaded a few maps and nothing was wrong with them. Then recently, AVG just popped up on launch and said this was a level 4 (Major) virus. The description said "unknown" which was unusual for this occasion. After doing stuff, AVG deleted the manager and restarted my computer. Something up with the manager or just my computer or AVG just kinda did something weird? HALP! :oNothing we host has any viruses in it and the Manager doesn't do anything except install maps and updates.
Nothing we host has any viruses in it and the Manager doesn't do anything except install maps and updates.
http://virusscan.jotti.org/en/scanresult/2362cc85fadb92b7104a21e84470af7da9238713 (http://virusscan.jotti.org/en/scanresult/2362cc85fadb92b7104a21e84470af7da9238713)
Notice AVG is in that list, and it did not find anything virus-related in the program.
is the map manager only for Windows or is it for Mac also?Windows only. There is no CoDWaW for Mac or Linux. If you use a Windows emulator for the game, use it for the Manager too - no guarantees that it will work though.
Hey Trem. Is the Map Manager having some issues? I have not been able to get it to connect to the server for a few days now.If the website's up, the download server is up. Same server.
If the website's up, the download server is up. Same server.
I'll check it out when I get home though.
It must have heard you and panicked. I just tried it and it worked. It really WAS playing up for a few days though. lol:D Don't know why it was not working for you, but glad it's working.
how do you download a map and actually put it in the manager?You can launch any map you have installed, regardless of how it was installed. The Manager scans your mods folder.
Hello, i have a question about where i click to get the map to begin downloading into my manager. I probably am just skipping over it when reading the map description, but still any help is good help! Thanks!Just select any map you want in the map list and then press "Download selected map" in the top right corner.
thanks! i re read it and tried running it as administrator and its working now!Go to the directory "C:\Users\*USERNAME*\AppData\Local\Activision\CoDWaW\mods" and see if the folders exist for the maps you downloaded. If they do then you probably haven't installed all the patches if you have the disk version of world at war from v1.1-v1.7. If they don't exist then the map manager probably doesn't have permission to place files there.
Post Merge: September 14, 2013, 10:31:55 pm
i downloaded a few maps and clicked launch but then they are not appearing in my mods menu, and it isn't opening straight up to them either, problem on my part or the computers? (i re-read the FAQ just to check and see and it appears that I'm doing everything that it says to correctly)
Go to the directory "C:\Users\*USERNAME*\AppData\Local\Activision\CoDWaW\mods" and see if the folders exist for the maps you downloaded. If they do then you probably haven't installed all the patches if you have the disk version of world at war from v1.1-v1.7. If they don't exist then the map manager probably doesn't have permission to place files there.i have that pulled up and it says mod.ff and z_openwarfare.iwd and i don't know what either of those are, and when i try to open them it says it doesn't know how to open them, I'm not very good at the whole computer gaming/mods thing so thank you for all the help so far.
i have that pulled up and it says mod.ff and z_openwarfare.iwd and i don't know what either of those are, and when i try to open them it says it doesn't know how to open them, I'm not very good at the whole computer gaming/mods thing so thank you for all the help so far.When you click launch that just launches the mod, if the map you downloaded doesn't have a start button you will have to go into the console and type "map *MAPNAME*". *MAPNAME* - Stands for the name of the map
Post Merge: September 15, 2013, 04:21:51 am
hello, once again i am having a problem. i downloaded the maps and they show up in my mods menu but when i click launch in game (or even from the manager) it doesn't start the map.
I have this problem now: http://i.imgur.com/tcibhPl.png (http://i.imgur.com/tcibhPl.png)
I reinstall WaW but i can't play??? What can I do??
yes :(
Then delete the map that you downloaded, redownload, and wait ATLEAST 10 seconds after the download bar hits 100%.The problem is, I can not run WaW. I've done everything :(
The problem is, I can not run WaW. I've done everything :(
when i open up the map manager I get this warning.Please read the topic before asking this question, it has been asked countless times in the last week alone.
UH OH Something went wrong. Our server data is most likely being updated. Try again later
It has said this warning for 3 days now what do i do?
Please read the topic before asking this question, it has been asked countless times in the last week alone.
I dont know what im supposed tolook for
UH OH Something went wrong. Our server data is most likely being updated. Try again later
great now none of the maps are working >:(
4. I installed a map using the Manager but when I try to play the map, it gives me a script error window during loading OR the map has unusual problems such as constant reloading or no zombies spawning.[/b]
-You most likely have "loose files" in your mods folder.
Check your
folder and make sure it ONLY contains folders. Avoid having ANY loose files such as in this example:(https://dl.dropbox.com/u/7345145/Untitled-1.png)
If your directory does not have any loose files, then most likely the Map Manager does not have permission to put files in your mods folder. Make sure you are running the program as an administrator by right clicking the .exe and clicking "Run As Administrator". Then try downloading the map in question again.
SO, I am having the problem a few others have, but doing everything its said to do so far, it hasn't worked.Is your world at war patched to version 1.7?(version number can be found on bottom right of main menu)
I downloaded the maps, and used the "Tools" Option to open WAW (I have a disc copy) and the maps I downloaded don't show up in the mods folder. I've tried re-dowloading it, Etc.etc.
Could I have help?
Didnt know where to ask this so I decided here butThat's normal, it means the mod has launched. You then have to type "map *MAPNAME*" in the console to start playing.
I recently downloaded abandoned rocket base of zm but when i try to launch it it wont play it just exits me back to the main menu
if you can't tell im new to this lol
Mine says:Your computer does not have the .NET Framework v4. It can be found here:
"To run this application, you first must install one of the following versions of the .NET Framework:
v4.0.30319
contact your application publisher for instructions about obtaining appropriate version of the .NET Framework."
i'll try and find a .Net Framework v4.0.30319 download.
When I'm downloading maps I download at 50kb/s why is this? I have a 20mb/s internet download speed.Might be an issue of distance from the server or a high use issue. This is what I'm getting:
When I'm downloading maps I download at 50kb/s why is this? I have a 20mb/s internet download speed.This may sound like a weird question, but when you are experiencing slow speeds, does the map thumbnail show as "Preview not Available"? Do any other maps in the manager have "Preview not Available" as their thumbnail?
This may sound like a weird question, but when you are experiencing slow speeds, does the map thumbnail show as "Preview not Available"? Do any other maps in the manager have "Preview not Available" as their thumbnail?For me, yep.
For me, yep.Ok, we will be adding support for an EU mirror choice in the Map Manager soon. Delta and I are speculating that there are either too many concurrent connections to the server at certain times or our host is throttling our bandwidth during peak periods. Either way, this should at least help some people.
This may sound like a weird question, but when you are experiencing slow speeds, does the map thumbnail show as "Preview not Available"? Do any other maps in the manager have "Preview not Available" as their thumbnail?When it happens to me the majority of the maps have that.
This may sound like a weird question, but when you are experiencing slow speeds, does the map thumbnail show as "Preview not Available"? Do any other maps in the manager have "Preview not Available" as their thumbnail?
So I'd like to start off by saying that the manager works perfectly fine me and one of my friends, but one of them is having a problem. We have the problem that was talked about on FAQ 3 and I don't remember if we tried that or not, but we are going to later today, but when he tries to install a map it doesn't show up in the mods folder (for UGX or ZM). I think the reason for this is that he had to create a folder and name it mods. Me and my friend it works for didn't have that problem. So I was wondering, is there a way to change where UGX installs the maps in the files? If I could find the UGX directory I would see if there is some code but I'm not sure where all the files are stored. We have checked and tried everything we can think of, from checking the capitalization of the folder to re-installing numerous times (and with his crap internet that's no easy task). Please help as soon as you can. He's had the game since December 13th and we haven't figured it out.Have him run the program as administrator.
I tried running the map manager app as a administrator and tried lunching a map on it, it brought me to world at war and i checked the mods button and nothing was there. I bought world at war on steam :(Check in
I´m sorry if it already was fixed or answered but if I start the Map Manager it say it has an update (1.42)You can download the latest version using the Download button on the first page of the thread. As far as the error message, maybe I forgot to upload the update to the EU server. I'll check.
But if i enter Yes it say it could not load the file from the Server( Could not access the file requested. Please try another mirror or try again later)
I tried it yesterday and today so I think something is broken :(
Sorry if I´m hard to understand I´m German ^^
You can download the latest version using the Download button on the first page of the thread. As far as the error message, maybe I forgot to upload the update to the EU server. I'll check.
What version of WaW are you using? Steam or Stand alone. Have you tried running the Map Manager as Administrator?
If you know how to activate 'Hidden files & Folders' in windows, do so and then navigate to your...
C:\Users\John\AppData\Local\Activision\CoDWaW\mods
*John = Your own username
and make sure the mods are in the folder.
im using stand aloneWhat?
What?im using the stand alone world at war not steam
im using the stand alone world at war not steamMake sure you have installed world at war's patches from 1.1-1.7. This could have been found on our How to Play Custom Maps (http://ugx-mods.com/forum/index.php?topic=694.0) guide.
I´m sorry if it already was fixed or answered but if I start the Map Manager it say it has an update (1.42)
But if i enter Yes it say it could not load the file from the Server( Could not access the file requested. Please try another mirror or try again later)
I tried it yesterday and today so I think something is broken :(
Sorry if I´m hard to understand I´m German ^^
Yeah, exactly the same for me (Im German too)At some point I must have messed up something with the updating on that version, but I don't know what. Download the latest version manually from the first post of this topic and the problem should go away.
Hey Guys--Use the download button in the first post of this topic :)
I tend to try to stay on top of the updates, since I am always looking for new maps (and that includes prowling ZM), But the latest update will not download. It tells me that the files are missing, I don't know why, when I try to download the update. This only happens with the latest version of the launcher, and so I am very confused. If I could get some help, I would appreciate it. *COUGH COUGH* TREMINAOR *COUGH* SAJEONE *COUGH COUGH*
Seriously, I want the update.
is there a fix for the 150KBps download speed issue? I can't even download a map in under 45 minutes which is very frustrating when i really want to play one.Our server changed IPs two days ago (which is why it was down for an hour) - after this IP change I no longer have the slow download speed issues.
Use the download button in the first post of this topic :)
I always have to download a new copy. It gets annoying you know. I live in US, and am not sure why this happens.If you always have to download a new copy then the Map Manager does not have permissions to overwrite itself in the current directory. Run the program as Administrator.
If you always have to download a new copy then the Map Manager does not have permissions to overwrite itself in the current directory. Run the program as Administrator.
I am the Admin on my laptop, and even when I do run it as an administrator, it doesn't work.The last version has an updater bug which causes the update to come up repeatedly, but in previous versions of the problem it should have worked fine.
The last version has an updater bug which causes the update to come up repeatedly, but in previous versions of the problem it should have worked fine.
HELP !!! When i open UGX it works fine to so i go to Tools\Launch Maps\(Any Map)\Launch or Launch into solo, and it just opens normal call of duty world at war with no map or game. i have at least 6 maps and it dosent work for any. also, i have tried running as admin and reinstalling cod waw. i have codwaw with steam. i have also tried reinstalling ugx manager. i cant find a solution, can anyone help? :please:
Whenever I go to download a map from the map manager, I click the download button and get the error:Did you try what the error says to try? There are two mirrors, US and EU.
"Could not access the file requested. Please try another mirror or try again later."
How do I fix this?
Hi,You should just be able to add an exception to your firewall so that it does not block downloads to the manager.
My router firewall is blocking the map previews in the manager. When i disable it they show up. Do you know which port (or ports) i need to open for the map previews to show up?
Thanks.
It is not blocking the downloads, only the preview images.Well it's downloading the images the same way it's downloading the maps.
Well it's downloading the images the same way it's downloading the maps.
When I try to save the map manager it says it couldn't be verified :rainbow:Are you running as "admin" ?
Is there a way to launch maps from UGX into windowed mode? i have a shit comp (1.6ghz processer :lol:) And i can't really play unless its in windowed or else its leik 10 FPS and slow-mo
My game crashes on loading screen with the error: "Couldn't find image 'zombie'" on the map zct_dubai_v1.1.
Kino der Toten works fine with no problems. Other maps had a error: "server script compile error, could not find script maps/...( please see console for details)". I had startet the .exe as administrator but it still give me the error. I have bought WAW at steam.
Has there been any attempt to allowing the default maps run the UGX mod? I'm quite fond of the custom roster of guns and it would be pretty rad to play with them on familiar maps.
Ofcourse I'm 90% uneducated in this area so I might have just asked a pretty stupid question so.
Easiest method is going to
mnt\Users\"yourusername"\AppData\Local\Activision\CoDWaW\mods
There you can delete the folders of the maps you don't want to keep.
c:\program files (x86)\steam\steamapps\common\call of duty 5 world at war\mods
c:\program files (x86)\activision\call of duty 5 world at war\mods
As most of UGX users know, YAW (YouAlwaysWin) always plays new maps that always appear to come from UGX. Although, everyday I open up the map manager, the maps are always the same, and there are never any new ones! Is this happening because it doesn't update for new maps, or is this how it is supposed to be? I'd like to know.
Help, I have a serious problem, I tried to install a map called Civil Nativity, but I got an error message saying that it failed to extract, I couldn't find the map, I can't install the map properly nor can I play it, and the thing is, there isn't an alternative link to download the map, so I'm stuck and I need your help.I just tried downloading it and it worked perfectly for me.
The program crashes immediately after I start it up. It says UGX Map Updater WForms has stopped working. I have tried running as administrator and I have .net 4.5 so I can't install 4.0. Please help, thanks.
When I go to look in my mods folder, it is located inside the folder of my username. Is this where it's supposed to be? :alone:yes
how do I get maps from the ugx mods website to appear in my ugx map manager.Only approved maps go in the manager, any others you will have to download the exe installers from the posts
there are a lot of maps that don't appear on the manager.
Its giving me the error that the manager cannot access the internet and that the map data might not be available. Should I wait? Is it a problem on my end or is the site experiencing an issue? Any replies would be great! Thank you.The site/server is currently online, so it's a problem on your end. Does the map manager have firewall permission? Are you running as admin? Do you have any internet security/Antivirs running?
i have recently installed several anti virus software's to takle a little trojan problem i had and since then trying to run UGX maps's are impossible.
when trying to run a map i played before downloading the anti virus a message pops up saying
"Your CoDWaW instillation could not be found. Please navigate to it. The location will be saved to your registry so that other programs can correctly find your instillation."
i have tried to uninstall UGX and try again but with no luck, tried running as administrator but same problem.
i have tried deleting the old save for a map and re instaling but no luck.
help!!! ;.;
please can some one help me this happens a lotmost mods dont even have a custom title screen? Have you actually "tried" starting the map?
So whenever i press either launch or launch into solo it just takes me to the main menu of world at war why does this happen and what can i do about it please help me
Does the UGX Map Manager have a virus or some malicious thing in it? I do not want to have a virus on my new computer since the old one I had got too many viruses and burned my motherboard (not saying UGX gave me virus). Just playing safe.No, the UGX Map Manager does not contain a single virus! It's completely safe. I'll add an image in a second ;)1 reply = 1 happiness ;D
No, the UGX Map Manager does not contain a single virus! It's completely safe. I'll add an image in a second ;)
Edit: (http://i.imgur.com/rwEawha.png)
Lukkie1998
most mods dont even have a custom title screen? Have you actually "tried" starting the map?ok that doesn't matter any more i have a new problem, when i go on ugx map manager i go to launch game on solo and it keeps taking me to a screen where to but my maps so i click on mods and nothing happens what is this please help
So I've got a fairly weird problem, I've been using UGX map manager for a while, and it always worked fine, till version 1.4.3.obviously... as win 10 will use the newest revision of .net, not the one this was "built" with. Hence why windows has compatibility modes
When I download a map, or try to it gets me an error message, which says (in short) that it cannot access the file requested. Unable to connect to remote server. Now I check if everything's working, site's up, firewall's okay, Virus scanner set to ignore the program, got the necessary files on my system, latest .NET etc..., so I try restarting the program. Now here's the weird thing, when I restart the program, and this happens every time, it will not connect to the internet, and suddenly I can't connect to the site either. If this would happen once or twice I'd say I've got some bad luck timing, but it happens every time and I have no idea why.
So, yeah, I'm out of ideas, anyone here have an idea of what might be causing this. Could it be that something with Windows 10 is causing this? I haven't quite figured out some background security things of the os yet. a.k.a. I have not found all of them yet.
UPDATE:
Windows 10 does have some trouble with .NET, but with some work around you can get it to install correctly.
But I guess this might be where the problem is. However this doesn't answer me why the site itself always goes offline for me at that exact moment, like it is just that exact timing every time. Which I doubt, I mean, what are the chances.
ok that doesn't matter any more i have a new problem, when i go on ugx map manager i go to launch game on solo and it keeps taking me to a screen where to but my maps so i click on mods and nothing happens what is this please help
When i download a map from the UGX Map Manager in the map's folder there is 2 files named "mpdata" and "mpdatabk0000" and when i launch the map through the UGX Map Manager it starts CoDWaW normally then brings me to the mod list and there is nothing there but gives me the option to "Launch" or "Launch without mods" but won't allow me to click Launch. Everything else is fine though.If theres no mods showing then there are none installed, and it wont let you click launch "because" there are no mods for you to select, to launch "with"
Why does the map manager download maps into SystemApps Folder among other random places such as WinSnx and not into the folder actually made for it? The mods are working, however, I don't really want these files scattered all over the place. It also makes it really difficult to transfer everything from my ssd to my hard drive.it doesnt
it doesnt
its my understanding, its installed to desktop then "moved" to the correct place, then the desktop file removed?
They "should" go to Appdata/activision/CODWAW/mods
in any case, the files put there, are the only ones that matter, any others can be ignored or deleted
(http://<blockquote class="imgur-embed-pub" lang="en" data-id="j4niN4f"><a href="//imgur.com/j4niN4f">View post on imgur.com</a></blockquote><script async src="//s.imgur.com/min/embed.js" charset="utf-8"></script>)
Maybe this one worked? sorry cant preview it first.
I have the disc version of WaW, and I have installed the Christmas mod from the UGX Manager, but when I go to Tools, launch into solo, and I go to the Mods area INGAME, it comes up blank with two options, Launch and Launch Without Mods? What do I do?
So.. I don't really want to use tools if I don't have too, but I want to understand how the tools function. Like when I install for example the Nacht_Redesigned where does it actually store the contents to and am I able to just manually edit it's contents or is it all packed in a specific way that isn't editable via Text Files. I'm use to languages like Java and C where I can just take an open source file and edit it then recompile. I'm not use to 200,000+ files that are needed to create a massive file with .ff and .idw or what ever they are called. I noticed you can extract the .exe's and get some files to work with, but when that .exe is installed where is it storing everything? I searched my PC by date / time modified/created and could not find any files within the World at War directory. Even in the mods Folder it there is only an Empty folder named the custom map I just installed, but no contents.all manager does, is "extract" a compressed rar of the mod, into your users/YOURUSER/appdata/CALL OF DUTY WAW/mods folder ( where it needs to be for the game to find it ) - nothing else. Same as the installers, only difference is it also downloads them for you, and you can launch the game through it ( more features to come )
Short version -> I'm just interested in how the maps are setup w/o the use of tools like what the tools are actually doing.
I try to launch a map using the manager and it doesn't work. It is running on administrator mode and I am having no complaints from my anti-virus.
I have registered and am logged in but the manager page says I can't see any of the external links to download the manager/maps.you dont use external links via map manager
how do we download more maps?
how do we download more maps?The list of maps in the map manager has not been updated in a long time because we have been working for over a year on redesigning the program. Soon we will be releasing a new application which contains way more maps, new and old.
im so frustated i have a error like step 4 but my mod folder is empty can someone help me ?
Please make sure you do not have a firewall blocking the program.I can't just turn off Firewalll for ugx for some reason
Can't use it
https://gyazo.com/1e3bee8a7cc40313b8e45d99a83ce6ab
Firewall is off :'( :'( :'(
I can't just turn off Firewalll for ugx for some reasonHaving the exact same issue :( Tried turning off my firewall but I still get the error message
Windows 8
Same here :(
I need help with playing modded maps. I downloaded it and when I want to play solo, it just said server script file error please help me!! :'(steam will not refund you coz you can't make "user made mods" work...
well i also tryed admin mode and clearing loose files and that still did nothing, i cleared all of the loose files out that I could find and still no results. I also copied the script link and nothing was under a file name of that sort please respond as soon as possible or I will be getting a refund from steam.
Delete your UGX Map Manager.exe file and download a fresh one from this site.
i installed the manager and downloaded a map but when i run the map and spawn in,i start to burn but not take damage and thas on every map and in campaign missions. What do i do ? please helphttp://ugx-mods.com/forum/index.php/topic,4460.0.html (http://ugx-mods.com/forum/index.php/topic,4460.0.html)
I installed the manager and the patch,first everything was fine but then when I started to play a map my screen was burning but not only in all maps but also in campaign missions. What do i do ?This may help you fix the flame screen: https://ugx-mods.com/forum/index.php?topic=4460.0
I have tried to play 5 different maps but every time I go to try to play them, the never load. When I try to find the files to the maps C:\Users\<USERNAME>\AppData\Local\Activision\CoDWaW\modsDo you have the Steam version of WAW or a disc version? You don't have a mods folder at all? Have you ever been able to get maps to work; is this only a recent problem?
its not existent, how do I get that/make the maps work.
2. The Manager gives me an unhandled exception when I try to run it or install a map/mod.and if u have waw installed correctly & from a valid source (Steam) what do u do?
-Considering this program has worked successfully more than 100,000 times for thousands of users you start to wonder what could possibly be going wrong for a handful of people. It usually boils down to an abnormal computer setup, an improperly installed or pirated copy of WaW, etc. Rarely is it ever a problem with our program any more. Verify that you have installed World at War correctly and that you installed it from a valid source such as Steam or the DVD release of the game.
and if u have waw installed correctly & from a valid source (Steam) what do u do?What operating system are you using? Do you have .Net Framework v4 installed? https://www.microsoft.com/en-ca/download/details.aspx?id=17851 (https://www.microsoft.com/en-ca/download/details.aspx?id=17851)
I keep getting, object reference not set to an instance of an object. (and at the bottom it reads)
JIT Debugging To enable just-in-time (JIT) debugging, the .config file for this
application or computer (machine.config) must have the
jitDebugging value set in the system.windows.forms section.
The application must also be compiled with debugging
enabled.
what do I do
When i launch the program it says (Could not connect to the internet) even though the internet is working for the website, any halp? ???Make sure your firewall, antivirus, etc are not blocking the connection for UGX Map Manager.
We look into this issue, so far this seems to happen only to users from Australia, can someone confirm it's not working from somewhere else?
Well shit :D Do you have Windows 10 ?
We look into this issue, so far this seems to happen only to users from Australia, can someone confirm it's not working from somewhere else?UK
Well shit :D Do you have Windows 10 ?Yea im from Gisborne, NewZealand and it gives me the same thing https://gyazo.com/5063e6b81a9b75f60b7e366481854d8a < Photo of what im being told
I don't know if anyone can help with this, but I'm trying to make a map, and I go to compile my newly made map, and I get the error: (!) UNRECOVERABLE ERROR: EXE_ERR_HUNK_ALLOC_FAILED256has exactly nothing to do with this thread
whenever i try to play any of the maps from the installer it has an overlay of fire on the screen how do i take it off i have tried deleteing waw and nothing happenshttps://www.ugx-mods.com/forum/modding/52/flame-screen-fix-very-easy/4460/ (https://www.ugx-mods.com/forum/modding/52/flame-screen-fix-very-easy/4460/)
ok so everytime i use the launcher and try to log in it says that i dont have permission to use the application yet....help?Have you tried to run the launcher in admin mode?
Hi.Dll error? Microsoft.net? Microsoft visual c++ installed?
I have a probleme where when i launch a map by the map manager, it shows this.
System.NullReferenceException: La référence d'objet n'est pas définie à une instance d'un objet. (it's french don't worry)
à UGX_Map_Updater_WForms.Form1.GetCodExe()
à UGX_Map_Updater_WForms.Form1.LaunchMapMenuClick(Object sender, EventArgs e)
à System.Windows.Forms.MenuItem.OnClick(EventArgs e)
à System.Windows.Forms.MenuItem.MenuItemData.Execute()
à System.Windows.Forms.Command.Invoke()
à System.Windows.Forms.Command.DispatchID(Int32 id)
à System.Windows.Forms.Control.WmCommand(Message& m)
à System.Windows.Forms.Control.WndProc(Message& m)
à System.Windows.Forms.ScrollableControl.WndProc(Message& m)
à System.Windows.Forms.Form.WndProc(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.OnMessage(Message& m)
à System.Windows.Forms.Control.ControlNativeWindow.WndProc(Message& m)
à System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
it worked 3 or 4 years ago and i wanted to go back to it and it didn't work
i don't know what to do, i tried the 4th entry in the faq and it didn't work
i don't even see the maps in the mods section in game
pls halp
PS: loved it back in time when i played it <3
Dll error? Microsoft.net? Microsoft visual c++ installed?I do run it in admin and I have c++ installed, the problem is that it worked on the same pc 4 years ago and I did not do any reboot or anything
what hard drive is it? a kernel thing? Running in admin? Have to man... select all file for launcher WITH-IN "launcher path", and select Cod2rad or all .exe files if you can. With in the .exe paths not a short cut. Found inside the actual mod tools. And run launcher.exe just that one. (While having the mentioned files selected expect multiple windows to pop up, its not win95 so you can bare the wait) mabey the security update installed previously in windows forgot to register it or something. Who knows win10 is bs for me. Idk man...
Hmm...... would I be able to recreate that problem if I find my rayman 3 hoodlum dvd game???? Hmmmm i wonder hmmm hmmm hope I can find it.... please try it on your end I dont want to move everything in my basement haha.I'm gonna try with the CD when I find it but I have no hope, if somone knows this problem and knows how to solve it pls respond
Double Post Merge: May 06, 2020, 11:07:18 pm
sorry it's too hard to solve, all i can really think is it's just a dll file or most likely a virus some where... I'll tell you a secret thoo I use to do this as a teen with those 5 limit applications window where you can LITERALLY open the application 5 times max and then its stuck at purchase. And don't work anymore even after a reuninstall. That by creating a new user account in windows that message display limit is back to 5 regardless of network connectivity or not, or both (reinstall thing). Try that. Create new profile for your windows os name it better or worse. Delete account if it dont. copy mod tools to your newly created account takes like 70282927 hour just to move everything from your old account thoo if it works.. if not Then sadly I cant help you. Because it's too hard. Sorry
Hi! I've managed to install UGX mod standalone. Im on Arch Linux. Can i download official maps without UGX Map Manager ? And is ther a repo where i can build it ?i dont think u can download the official ugx maps without using the ugx map manager to download those specific kinds of maps that r not on the website to download them on, not sure tho, cuz they have no links for it and only available on the map manager
i dont think u can download the official ugx maps without using the ugx map manager to download those specific kinds of maps that r not on the website to download them on, not sure tho, cuz they have no links for it and only available on the map managerI was hoping for them to provide mirrors. The UGX Launcher seems to be still in private beta and the map manager doesn't work on wine.
You can lookup the download path in the XML file: https://www.ugx-mods.com/downloads/manager/UMM.xml (https://www.ugx-mods.com/downloads/manager/UMM.xml)Thank you, you saved me a lot of time. Does the puplic link is the same version as the Map manager one ?;)
Shouldn't be rocket science to find the download link :)
Yup just pick the latest version of each map, thats exactly what the map manager does download & extract.I just noticed that the md5 sum of the Update tag are not corresponding to any map archive, what am I doing wrong ?
I just noticed that the md5 sum of the Update tag are not corresponding to any map archive, what am I doing wrong ?No idea about the technical implementaion and how this md5 is generated or how it is used.
No idea about the technical implementaion and how this md5 is generated or how it is used.I've talked with someone, and we kinda agreed that the UMM.xml have an issue .
It's a legacy application which works as it is :)
when i click launch or launch as solo on ANY map that i downloaded nothing happens not even an error just nothingu need to open up ur game to be able to launch the maps for it to work, launching maps thru the ugx map manager doesnt work anymore
any solution?
ugx mod manager btw