I've checked lots of tutorials and wikis and checked to see if my scripting was correct and I don't see any error but there must be one. I'm not sure if it's in the gsc or not
dlc3_zone_init()
{
add_adjacent_zone( "start_zone", "zone_revive", "enter_zone_revive" );
add_adjacent_zone( "zone_revive", "zone_mp40", "enter_zone_mp40" );
add_adjacent_zone( "zone_mp40", "zone_jugg", "enter_zone_jugg" );
add_adjacent_zone( "zone_jugg", "zone_power", "enter_zone_power" );
add_adjacent_zone( "zone_power", "zone_beer", "enter_zone_beer" );
add_adjacent_zone( "zone_beer", "zone_speed", "enter_zone_speed" );
add_adjacent_zone( "zone_speed", "zone_box", "enter_zone_box" );
add_adjacent_zone( "zone_box", "zone_ppsh", "enter_zone_ppsh" );
add_adjacent_zone( "zone_ppsh", "zone_pap", "enter_zone_pap" );
/*
=============
///ScriptDocBegin
"Name: add_adjacent_zone( <zone_revive>, <zone_mp40>, <zone_jugg>, <zone_power>, <zone_beer>, <zone_speed>, <zone_box>, <zone_ppsh>, <zone_pap>, <flag>, <one_way> )"
"Summary: Sets up adjacent zones."
"MandatoryArg: <zone_revive>: Name of first Info_Volume"
"MandatoryArg: <zone_mp40>: Name of second Info_Volume"
"MandatoryArg: <zone_jugg>: Name of third Info_Volume"
"MandatoryArg: <zone_power>: Name of fourth Info_Volume"
"MandatoryArg: <zone_beer>: Name of fifth Info_Volume"
"MandatoryArg: <zone_speed>: Name of sixth Info_Volume"
"MandatoryArg: <zone_box>: Name of seventh Info_Volume"
"MandatoryArg: <zone_ppsh>: Name of eighth Info_Volume"
"MandatoryArg: <zone_pap>: Name of ninth Info_Volume"
"MandatoryArg: <flag>: Flag to be set to initiate zones"
"OptionalArg: <one_way>: Make <zone_1> adjacent to <zone_2>. Defaults to false."
"Example: add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" );"
///ScriptDocEnd
=============
*/
// Outside East Door
//add_adjacent_zone( "receiver_zone", "outside_east_zone", "enter_outside_east" );
}